Ford E-150 (2011 year). Manual - part 21

 

  Index      Ford     Ford E-150 - service manual 2011 year in english

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  19  20  21  22   ..

 

 

Ford E-150 (2011 year). Manual - part 21

 

 

Adjusting the front manual seat (if equipped)

WARNING: Never adjust the driver’s seat or seatback when the
vehicle is moving.

WARNING: Always drive and ride with your seatback upright
and the lap belt snug and low across the hips.

Lift handle to move seat forward or
backward.

Pull lever up to adjust seatback.

WARNING: Before
returning the seatback to its

original position, make sure that
cargo or any objects are not
trapped behind the seatback. After
returning the seatback to its
original position, pull on the
seatback to ensure that it has fully
latched. An unlatched seat may
become dangerous in the event of
a sudden stop or collision.

Seating and Safety Restraints

86

Using the manual lumbar support (if equipped)

The lumbar support control is
located on the inboard side of the
driver’s seat.

Turn the lumbar support control
clockwise to increase firmness.

Turn the lumbar support control
counterclockwise to increase
softness.

Adjusting the front power seat (if equipped)

The control is located on the outboard side of the seat cushion.

Press to raise or lower the front
portion of the seat cushion.

Press to raise or lower the rear
portion of the seat cushion.

Seating and Safety Restraints

87

Press the control to move the seat
forward, backward, up or down.

REAR SEATS

Rear captains chair adjust — passenger side only

Pull the lever to adjust the seat
forward or backward.

Seating and Safety Restraints

88

Quick-release captains chair
(7 passenger configuration- second row only)

To remove the seat:

1. Disengage the lap/shoulder belt
from the seat by inserting a key or
small screwdriver into the slot in the
detachable anchor and lifting
upward.

2. Pull the seat latch handle, then
pull the seat toward the right side of
the vehicle to disengage four pins
from the floor mount.

3. Remove the seat.

To install the seat:

WARNING: Check to see that the seat and seatback is latched
securely in position. Keep floor area free of objects that would

prevent proper seat engagement. Never attempt to adjust the seat
while the vehicle is in motion.

WARNING: Ensure that the seat is latched to the vehicle floor
by pushing/pulling on the seat. If not latched, the seat may cause

injury during a sudden stop.

Seating and Safety Restraints

89

 

 

 

 

 

 

 

Content   ..  19  20  21  22   ..