|
|
1F3-20 OM600 ENGINE CONTROLS Tools Required 617 589 04 21 00 Tester 1. Disconnect the fuel line (2) from the fuel filter. 2. Remove the banjo bolt (4) from the fuel injection pump and remove the seals (3) and fuel line (2). 3. Connect the tester (5). 4. Start the engine and read off the fuel pressure on tester (5). Notice If out of standard, replace the fuel feed pump. Tester 617 589 04 21 00 5. Stop the engine. At idle Speed At full load > 0.3bar > 0.5bar 6. Remove the tester. 7. Replace the seal and connect the fuel line (2). |