|
|
1B3-110 OM600 ENGINE MECHANICAL 5. Using the press lever (9), press the spring retainer(3) downward and remove the valve cotters (2) with magnetic Notice Be careful not to damage guide bore of the valve tappet. Removal & Installation Procedure 1. Remove the valve tappet (1) with magentic lifter. Notice Place the valve tappets upside down (open end upward) Magentic Liter 102 589 03 40 00 2. Install the holding wheel (7) into the timing chain of camshaft sprocket piston. Holding Wheel 603 589 01 40 00 3. Position the piston of relevant cylinder at TDC. 4. Install the supporting bar (8). Supporting Bar 667 589 02 63 00 Press Lever 667 589 00 31 00 Magnetic Finger 116 589 06 63 00 |