Daewoo Korando. Service manual - part 22

1B1-24  M162 ENGINE MECHANICAL

POLY V-BELT

Preceding Work : Removal of cooling fan

1 Poly V-belt

Removal & Installation Procedure

1. Release the belt tension by turning the belt tensioning pulley

nut clockwise.

2. Remove the poly v-belt.

Notice

Check the belt for damage and tensioning pulley bearing
point for wear and replace them if necessary.

3. Install the belt by turning the nut of tensioning pulley

clockwise.

2 Belt Tensioning Pulley

M162 ENGINE MECHANICAL  1B1-25

Poly V-Belt Arrangement

1 Belt Tensioning Pulley
2 Crankshaft Belt Pulley
3 A/C Compressor Pulley
4 Cooling Fan Pulley

5 Alternator Pulley
6 Idler
7 Power Steering Pump Pulley
8 Cooling Fan and Water Pump Pulley

1B1-26  M162 ENGINE MECHANICAL

TENSIONING DEVICE

Preceding Work : Removal of poly v-belt

1 Belt (L = 2245)
2 Bolt Combi(M8 x 14, 3 pieces) + Washer

....................................................... 22.5-27.5Nm

Removal & Installation Procedure

1. Remove the poly v-belt.

2. Remove the tensioning pulley by turning its mounting nut

counter clockwise as shown in figure.

Installation Notice

3 Water Pump Pulley
4 Nut
5 Tensioning Pulley

Tightening  Torque

40.5 - 49.5 Nm

M162 ENGINE MECHANICAL  1B1-27

4. Remove the mounting bolts(M8 x 30, 3 pieces) at the

tensioning device, and remove the tensioning device (arrow).

Installation Notice

3. Remove the 3 bolts (2) and remove the water pump pulley

(arrow).

Installation Notice

5. Installation should follow the removal procedure in the

reverse order.

Tightening  Torque

22.5 - 27.5 Nm

Tightening  Torque

26 - 32 Nm