|
|
3. Install a slide hammer onto the end of J 26941 . See Special Tools. 4. Remove the needle bearing (2). Fig. 241: Installing Oil Pump Cover Assembly Needle Bearing Using J 8092 5. Install the large end of J 43775 (2) onto J 8092 (1). See Special Tools. 6. Drive the needle bearing (3) into the oil pump cover assembly (4) until J 43775 sets. See Special Tools. IMPORTANT: The needle bearing may be installed with either end up.
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Automatic Transmission - Allison - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
|