|
|
PPS module. The instrument panel cluster (IPC) grounds all indicator control circuits to the After the SDM is programmed, the SDM setup procedure is required. During this set up Conditions for Running the DTC Ignition voltage is between 9-16 volts. Conditions for Setting the DTC B1019 00 The SDM was programmed with the wrong options for the vehicle. The wrong components were installed for the content of the vehicle. SDM connector may have bent pins or shorting bars causing the SDM to learn deployment B1019 3A The vehicle was configured for passenger presence system (PPS) but the SDM does not The vehicle is not configured for PPS and the SDM detects that the PPS indicator is Action Taken When the DTC Sets The SDM commands the AIR BAG warning lamp ON. The SDM disables all deployments when B1019 00 DTC is set as current. Conditions for Clearing the DTC The correct SDM must be installed. The correct components must be installed. The PPS indicator operates as indicated in the SIR System Description and Operation.
2008 Chevrolet Silverado 1500 2008 RESTRAINTS Supplemental Inflatable Restraints - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
|