|
|
Conditions for Setting the DTC B0015 01, B0016 01, B0019 01, B0020 01, B0022 01, B0023 01 The air bag module high and/or low circuit is short to voltage for 120 milliseconds. B0015 02, B0016 02, B0019 02, B0020 02, B0022 02, B0023 02 The air bag module high and/or low circuit is short to ground for 120 milliseconds. B0015 04, B0016 04, B0019 04, B0020 04, B0022 04, B0023 04 The air bag module high and/or low circuit is open for 120 milliseconds. B0015 0D, B0016 0D, B0019 0D, B0020 0D, B0022 0D, B0023 0D The air bag module deployment loop resistance is greater than 3.9 ohms for 120 milliseconds. B0015 0E, B0016 0E, B0019 0E, B0020 0E, B0022 0E, B0023 0E The air bag module deployment loop resistance is less than 1.1 ohms for 120 milliseconds. Action Taken When the DTC Sets The SDM commands the AIR BAG indicator ON. The SDM will store a DTC, if event occurs system will still attempt deployments. Conditions for Clearing the DTC The condition for setting the DTC no longer exists. A history DTC will clear once 100 fault-free ignition cycles have occurred. Diagnostic Aids When a harness connector is disconnected, the high control and low control circuits are This DTC usually indicates a poor connection or a wiring malfunction between the SDM Reference Information Schematic Reference
2008 Chevrolet Silverado 1500 2008 RESTRAINTS Supplemental Inflatable Restraints - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
|