|
|
Content .. 2623 2624 2625 2626 ..
5. Inspect the gear teeth for abrasive wear. The marks left by the machining process are erased from the active flank. Instead, the entire 6. If abrasive wear is present, replace the affected components. Abrasive wear is caused by the following conditions: Oil contamination resulting from wear or surface fatigue in other areas of the Sand, sludge, etc. penetrating into the transmission from the outside
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Manual Transmission - Tremec 5-Speed (TZ0)
|