|
|
Content .. 2363 2364 2365 2366 ..
hardware and/or lining hardware Bent or damaged caliper or mounting 2. Adjust, repair or replace components as necessary. Refer to Disc Brake System Did you find and correct a condition? Go to Step 14 Go to Step 9 9 1. Separate the brake booster pushrod from the brake pedal. 2. Inspect the brake corners to determine if the brake drag condition is still present. Do the brake corners still exhibit the brake drag Go to Step 11 Go to Step 10 10 1. Inspect the pushrod for improper positioning and/or damage. Correctly 2. Inspect the brake pedal assembly for damage and replace if necessary. Did you complete the repair or replacement? Go to Step 14 - 11 1. For vacuum boost systems, disconnect the vacuum check valve from the booster to 2. Separate the master cylinder from the brake booster. Do not disconnect any 3. Inspect the brake corners to determine if the brake drag condition is still present. Do the brake corners still exhibit the brake drag Go to Step 13 Go to Step 12 12 Replace the brake booster assembly. Go to Step 14 - 1. Inspect the hydraulic brake system for the
2008 Chevrolet Silverado 1500 2008 BRAKES Hydraulic Brakes - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
|