|
|
21. If reusing the engine oil pressure gage sensor, apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent, to the threads of the engine oil pressure gage sensor. 22. Install the engine oil pressure gage sensor using the J 41712 . See Special Tools. Tighten: Tighten the engine oil pressure gage sensor to 30 N.m (22 lb ft). Fig. 618: Block Heater 23. Install the block heater from the right side of the lower engine block. Tighten: Tighten the block heater to XX N.m (XX lb ft).
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
|