|
|
Content .. 1015 1016 1017 1018 ..
Missing or loose balance weights Imbalance caused by heat distortion or fluid contamination CLUTCH PLATE DIAGNOSIS COMPOSITION PLATES Dry the plates and inspect the plates for the following conditions: Pitting Flaking Delamination-splitting or separation of bonded clutch material Wear Glazing Cracking Charring Chips or metal particles embedded in the lining Replace a composition plate which shows any of these conditions. STEEL PLATES Wipe the plates dry and check the plates for heat discoloration. If the surfaces are smooth, even if CAUSES OF BURNED CLUTCH PLATES The following conditions can result in a burned clutch plate: Incorrect usage of clutch or apply plates Engine coolant or water in the transmission fluid A cracked clutch piston Damaged or missing seals Low line pressure Valve body conditions The valve body face is not flat. Porosity is between channels.
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
|