Audi A4. Body repair manual - part 51
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Adapting SRI for inspection service Interval-1
(IN1) (time in days)
This function is used to enter the time until the
next inspection service 1 is due (see service
schedule "Maintenance Service").
Rapid data transfer
HELP
Indicated on display
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10 and press -
Q- button to confirm input.
Adaptation
Q
Indicated on display
Insert channel number XX
- Press buttons -0- and -7- to insert channel 07.
- Press -Q- button to confirm input.
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Channel 7 Adaptation 11
Indicated on display
-1 3-
The display shows the days remaining until the next inspection service 1
is due (in this example "11" indicates 110 days remaining).
Notes:
Values can only be entered in increments of 10 days. Therefore the
display shows blocks of 10 days.
When using the scan tool keypad, only the direct input method can be
used.
If an incorrect value is input, the "adaptation" function 10 will be
cancelled and must be initiated again.
- Press button.
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Channel 7 Adaptation 11
Indicated on display
Input adaptation value XXXXX
- Input desired interval value using keypad on VAG1551, fill in leading
digits with zeroes "0."
Example:
Specification: 360 days
Input value: 00036
Channel 7 Adaptation 11
Q
Indicated on display
Input adaptation value 00036
- Press -Q- button to confirm input.
Channel 7 Adaptation 36
Q
Indicated on display
- 1 3-
- Press -Q- button to confirm input.
Channel 7 Adaptation 36
Q
Indicated on display
Store changed value?
- Press -Q- button to confirm input.
Channel 7 Adaptation 36
Indicated on display
Changed value is stored
- Press button to end SRI adaptation.
Rapid data transfer
HELP
Indicated on display
Select function XX
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Adapting SRI for inspection service Interval-2
(IN2) (time in days)
This function is used to enter the time until the
next inspection service 2 is due (see service
schedule "Maintenance Service").
Rapid data transfer
HELP
Indicated on display
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10 and press -
Q- button to confirm input.
Adaptation
Q
Indicated on display
Insert channel number XX
- Press buttons -0- and -8-.
- Press -Q- button to confirm input.
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Channel 8 Adaptation 45
Indicated on display
-1 3-
The display shows the days remaining until the next inspection service 2
is due (in this example "45" indicates 450 days remaining).
Notes:
Values can only be entered in increments of 10 days. Therefore the
display shows blocks of 10 days.
When using the scan tool keypad, only the direct input method can be
used.
If an incorrect value is input, the "adaptation" function 10 will be
cancelled and must be initiated again.
- Press button.
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Channel 8 Adaptation 45
Indicated on display
Input adaptation value XXXXX
- Input desired interval value using keypad on VAG1551, fill in leading
digits with zeroes "0."
Example:
Specification: 720 days
Input value: 00072
Channel 8 Adaptation 45
Q
- Indicated on display
Input adaptation value 00072
- Press -Q- button to confirm input.
Channel 7 Adaptation 72
Q
- Indicated on display
-1 3-
- Press -Q- button to confirm input.
Channel 7 Adaptation 72
Q
- Indicated on display
Store changed value?
- Press -Q- button to confirm input.
Channel 7 Adaptation 72
- Indicated on display
Changed value is stored
- Press button to end SRI adaptation.
Rapid data transfer
HELP
Indicated on display
Select function XX
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Adapting odometer display (km/mi)
This function is used to adapt the odometer
reading (in km or miles) after replacing the
instrument cluster.
Notes:
The adaptation function can only be carried out
on an instrument cluster with an odometer
reading of not more than 100 kilometers (62
miles).
The adaptation function can only be carried out
once for each instrument cluster.
Only a larger adaptation value can be entered,
not a lower one.
If an incorrect value is entered and confirmed,
no correction is possible. If this is the case, the
instrument cluster must be replaced with a new
one.
In countries where speedometers are calibrated
in miles, adjustments must still be made in
kilometers. Therefore convert miles to
kilometers (miles x 1.609 = kilometers) to get
the required adaptation value.
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Selecting function:
- Press -C- button.
Rapid data transfer
HELP
Indicated on display
Select function XX
- Press buttons -1- and -1- to select "Login-Procedure" function 11.
Rapid data transfer
Q
Indicated on display
11 - Login-procedure
- Press -Q- button to confirm input.
Login procedure
Indicated on display
Enter code number XXXXX
- Enter code number 13861.
Login procedure
Q
Indicated on display
Enter code number 13861
- Press -Q- button to confirm input.
Rapid data transfer
HELP
Indicated on display
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10.
Rapid data transfer
Q
Indicated on display
10 - Adaptation
- Press -Q- button to confirm input.
Adaptation
Q
Indicated on display
Insert channel number XX
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
- Press buttons -0- and -9- to select channel
number 09.
- Press -Q- button to confirm input
Channel 9 Adaptation 2
Indicated on display
-1 3-
Note:
When using the VAG1551 keypad, only the direct input method can be
used.
- Press button to advance through program sequence.
Channel 9 Adaptation 2
Q
Indicated on display
Input adaptation value XXXXX
- Input adaptation value using keypad.
Example:
Odometer reading = 89627
0 8 9 6 3
X
Hundred thousands: 100000 - 655350 km
Radio, On Board Diagnostic (OBD) (m.y. 1998 [micro])
Radio, On Board Diagnostic
(OBD) (m.y. 1998
)
General information
Technical features of radio systems
The new generation of the Audi radio system has
extensive On Board Diagnostic (OBD) capability.
All radio units have a Diagnostic Trouble Code
(DTC) memory. If a malfunction occurs in one of
the components or wires which is monitored by
the system, a record of the type of malfunction is
stored in DTC memory.
Radio, On Board Diagnostic (OBD) (m.y. 1998 [micro])
Radio On Board Diagnostic (OBD),
initiating program
Test requirements
Fuse OK per wiring diagram
Electrical Wiring Diagrams, Troubleshooting &
Component Locations
VAG1551 Scan Tool (ST) connected page
01-108
Ignition switched on
Notes:
If the display remains blank, check the voltage
supply of the VAG1551 Scan Tool (ST)
according to the wiring diagram.
Additional operating instructions can be printed
out by pressing the HELP button.
The button is used to advance through the
program sequence.
Radio, On Board Diagnostic (OBD) (m.y. 1998 [micro])
button to escape.
In "Rapid data transfer" operating mode 1 the
"Automatic Test Sequence" function 00 can be
carried out. This checks DTC memory of all
vehicle control modules (with OBD capability)
automatically.