Siemens Desiro DB BR 642 RSSLO. Manual

 

  Главная      Учебники - Разные 

 

поиск по сайту            правообладателям  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Siemens Desiro DB BR 642 RSSLO. Manual

 

 

DB BR 642
Diesel multiple unit
1
ROLLING STOCK
2
1.1
DB 642
2
2
CAB CONTROLS
3
2.1
PICTURE 1: RIGHT SIDE
3
2.2
PICTURE 2: LEFT SIDE
4
2.3
START-UP PROCEDURE
5
2.4
CONTACT KEY
5
2.5
SIFA
5
2.6
PZB CONTROL PANEL
6
2.7
RADIO DISPATCHER LINE
7
2.8
DOORS
9
2.9
DISPLAY
10
2.10
STOPPING POINT
12
2.11
GSP 95 (DESTINATION DISPLAY)
13
3
KEYBOARD LAYOUT
15
4
SCENARIOS
16
1 ROLLING STOCK
1.1 DB 642
Model name in Train simulator: DB 642_A and DB 642_B
2 CAB CONTROLS
Picture 1: Right side
2.1 Picture 1: Right side
Door indicator - locked/unlocked (1)
Door indicator - opened/closed (2)
Throttle/brake (3)
Sander (4)
Air brake (5)
Spring brake - released (6)
Spring brake - applied (7)
Wipers (8)
Headlights (9)
Picture 2: Left side
2.2 Picture 2: Left side
PZB Override (1)
PZB Release (2)
PZB Acknowledge (3)
High beam light (4)
Desk/cab light (5)
Instrument light (6)
SIFA indicator (7)
Traction indicator (8)
High beam indicator (9)
Contact key (10)
Reverser (11)
Doors lock control (12)
2.3 Start-Up procedure
Insert contact key and turn it to the active position.
On Main display find the “Diesel” and click on the button below (number 3).
On Diesel display find “Motor ein” and click on the button below (number 2) to
start the engine motor.
Release the spring brake.
Choose the direction of driving.
Turn the headlights on.
The DB 642 is now ready.
2.4 Contact key
To activate the cab, the contact key must be inserted and switch it to the »BETR.« position (like in
"Picture 2"). There is only one contact key for one DMU and before you change the cab, you will
need to remove the contact key from the lock.
2.5 SIFA
The SIFA is disabled on startup, but can be activated with »SHIFT + NUM ENTER«. You can choose
between basic SIFA and advanced SIFA.
Basic SIFA
You must confirm SIFA within 30 seconds from your last confirmation. If it was not confirmed in
30 seconds then the emergency brake will be applied. Before the emergency brake will be applied
the warning voice will turn on.
Advance SIFA
You can hold the SIFA button down for max. 30 seconds but if you hold it more than 30 seconds,
the emergency brake will be applied, before this happens the warning voice will turn on. When
the SIFA button is not held, then the emergency brake will be applied after 5 seconds. If the
emergency brake is applied, then you must press SIFA button again and release the train brake.
2.6 PZB control panel
The PZB control panel in game is used to change the PZB mode (55, 70 and 85).
Picture 3: PZB
First click on the “Selecting” button for turning on the PZB display and wait until you can see only
the first red dot. First red dot is for the train driver number and you can choose your own train
driver number with the “Keypad”, just select your number and click on “Confirm”. Then click on
the “Selecting” again so the red dot will move to the “Brake percent” on the keypad. Now you
must enter the numbers 080 and then the brake percent on the last three digits. The third dot is
for the train number, the fourth is for the hour (you cannot change it), the fifth is for the date
(you cannot change it) and the sixth dot is finish.
With the brake percent you can change between 55, 70 or 85 driving regime.
Brake percent
Driving regime
>111
85 (O)
66 - 110
70 (M)
<65
55 (Ü)
2.7 Radio dispatcher line
Picture 4: Radio dispatcher line main display
The Radio dispatcher line is in use for conversation between train drivers and dispatchers. On this
model it’s not possible to get the conversation with the dispatcher. This was created only for all
gamers who love to drive like real train drivers. To enter a new channel, you must press the “Enter
channel”. Now first select the channel type (A, B, C) and then the channel number (Picture 4). If
you are satisfied with the channel then just confirm it with the confirm button.
Picture 5: Channel selection
To enter a new train number you must pressed the “Enter the train number” and then enter the
new train number, to finish entering the new train number you must confirm the train number
with the confirm button.
2.8 Doors
If you want to open the doors, first you need to unlock them with the “Door lock control” (Picture
2, number 13) and then press T button on the keyboard to open the doors (only doors on
platform will open). If you want to close the doors put “Door lock control” into the “Lock doors”
position.
Picture 6: Doors
2.9 Display
Traction display:
1. SIFA or PZB emergency brake is applied
2. Emergency brake is applied
3. Doors are unlocked
4. No direction is selected
5. Throttle/brake lever is not on neutral position
6. Spring brake is applied
Display symbols
No traction
Motor is off
Motor is starting
Motor is shutting down
Air brake is applied
Spring brake is applied
STOP at the next station
(if passengers request
to stop on next station)
2.10 Stopping point
On some routes the trains will not stop at small stations if passengers don’t request to stop. In the
scenario editor you can find the “RSSLO Desiro Stop” object that can be added to the tracks.
When the model passes this point, the indicator “Haltewunsch” (stop on next station) will show
up on main display.
Picture 7: Stopping point object
2.11 GSP 95 (destination display)
To show the destination names on the train, it is necessary to enter the number into the GSP 95.
Picture 8: GSP 95
Two options to enter the number:
You need to input number from list that is located in:
͙/railworks/Manuals/EN/DisplayStations.pdf
If the input number is bigger than 100 the models always chooses the last two digits of the
number. For example if the entry number is
4567 the model will select number
67
(Großheringen).
Picture 9: Train number for the destination board
The user must add the new text file with the name of the train number. In this file the user must
also write the name of the sound file (000-200) and the distance traveled in meters.
Picture 10: Announcement sound
The sound files are located in the:
.../railworks/Assets/RSSLO/VT642/RailVehicles/Sound/GSP/Sounds/”001-200”.dav
The sounds are empty, so the user must change the sound files to hear the sound in the game.
The traveled distance starts counting from the point of train number entry. The best way to get
the traveled distance is to input the 99999 train number on the start station and where the user
wants to hear the sound file then the user needs to use the “CTRL+U” keys to get the traveled
distance.
For the AI trains, the destination will be selected depending on the first vehicle number
(depending on travel direction). The destination will show up when the train will start driving.
3 KEYBOARD LAYOUT
Function
Key
Increase / decrease Throttle-brake
A / D
Increase / decrease Reverser
W / S
Increase / decrease Train Brake
‘’ /
͖
Horn 1
Space
PZB override
Page down
PZB release
End
PZB acknowledge
Delete
PZB activated/deactivated
CTRL + NUM ENTER
Confirm SIFA
Q or Num Enter
SIFA activated/deactivated
SHIFT + NUM ENTER
SIFA basic-advance
SHIFT + S
Headlights
H (SHIFT + H)
Wipers
V (SHIFT + V)
Sander
X
GSP length
CTRL + U
Lock doors
C
Motor on/off
Z (SHIFT + Z)
Spring brake Apply
SHIFT + /
Spring brake release
/
Instrument lights
I
Cab light
L/SHITFT + L
4 SCENARIOS
RSSLO Morning local train
1. Rating: *
2. Duration: 20 min
3. Scenario type: Career scenario
4. Route: Munich to Garmisch
RSSLO Rainy day
1. Rating: ***
2. Duration: 35 min
3. Scenario type: Career scenario
4. Route: Munich to Garmisch
RSSLO Route Problem
1. Rating: ***
2. Duration: 35 min
3. Scenario type: Career scenario
4. Route: Munich to Garmisch

 

 

 

 

 

 

 

 

 

 

 

///////////////////////////////////////